All keys are in compliance with TS 147/9 DIN 6885 NORM measurements and have four surfaces fully grinded.

Doğru Taşlama Tabloları

---

TOLARANCE h 9		-0.03	-0.03	-0.036	-0.036	-0.043	-0.043	-0.043	-0.043	-0.052	-0.052
WIDTH - B - B		5	6	8	10	12	14	16	18	20	22
TOLARANCE h 11		-0,075	-0,075	-0,090	-0,090	-0,0110	-0,110	-0,110	-0,110	-0,130	-0,130
HEIGHT -H		3-5	4-6	5-7	6-8	6-8	6-9	7-10	7-11	8-12	9-14
LENGHT TOL.  L	MİN MAX	12 56	16 70	20 90	25 110	32 140	40 160	45 180	50 200	56 220	63 250
-0.2	12...15	0.51	-	-	-	EURO/PSC		-	-	-	-
-0.2	16...19	0.51	0.51	-	-	-	-	-	-	-	-
-0.3	20...24	0.51	0.52	0.55	-	-	-	-	-	-	-
-0.3	25...31	0.52	0.55	0.56	0.58	-	-	-	-	-	-
-0.3	32...39	0.55	0.56	0.58	0.63	0.73	-	-	-	-	-
-0.3	40...44	0.59	0.57	0.62	0.64	0.76	0.83	-	-	-	-
-0.3	45...49	0.61	0.58	0.64	0.67	0.80	0.88	1.07	-	-	-
-0.3	50...55	0.74	0.62	0.67	0.71	0.85	0.92	1.14	1.21	-	-
-0.3	56...62	0.83	0.64	0.71	0.74	0.90	0.98	1.21	1.30	1.45	-
-0.3	63...69		0.67	0.73	0.78	0.94	1.03	1.29	1.41	1.64	1.88
-0.3	70...89		0.74	0.78	0.82	0.99	1.11	1.37	1.55	1.73	2.01
-0.5	90...109			0.92	1.12	1.46	1.74	2.28	2.52	2.79	3.04
-0.5	110...139				1.30	1.67	1.95	2.52	2.79	3.03	3.28
-0.5	140...159					1.88	2.40	3.01	3.28	3.51	3.79
-0.5	160...179						2.60	3.28	3.54	3.79	4.02
-0.5	180...199							3.54	3.79	4.02	4.30
-0.5	200...219								4.02	4.30	4.53
-0.5	220...230									4.53	4.80
-0.5	231...250										5.29
MINIMUM ORDER QUANTITY		150 Pcs.	100 Pcs.	100 Pcs.	100 Pcs.	75 Pcs.	75 Pcs.	75 Pcs.	50 Pcs.	50 Pcs.	50 Pcs.

---

Plain Key Opening Measurements for Shaft and Holes

---

With this operation keys do not get crushed or loosened in housing under high power and pressure during power transmission. Consequently, the life-span of component in operation is extended and maintenance costs are
reduced leading to high quality products and increased customer satisfaction.